Oven door glass shattered
Tools: work gloves, vacuum, screwdriver or Torx driver, towels, shop vacuum for the oven cavity · Materials: replacement door glass (inner or outer) for the exact model number, new glass seal or clips if supplied
Steps
- Switch the oven off at the breaker or unplug it and let it cool; wear gloves and sweep up the large pieces before vacuuming the small ones from the floor and the oven cavity.
- Find the model number on the door frame or the oven's side edge and order the matching panel — inner, middle and outer glass are different parts.
- Open the door to the first stop, flip the hinge locks, and lift the door off; lay it face down on towels.
- Remove the screws along the door's inner edge to split the door and lift out the broken panel, clips and any remaining fragments.
- Fit the new glass with its clips and seal in the same orientation, reassemble the door, and hang it back on the hinges.
- Run the oven empty at 180 °C (350 °F) for 20 minutes and check the door closes flat and stays cool on the outside.
Stop and call a pro if
- the inner glass shattered while the oven was in use — the door needs checking for a warped frame that stressed the glass
- the oven is gas and a panel behind the door hides the burner or gas connections
- the door will not close flat after the new glass is in — a bent hinge stresses the glass and it can shatter again
What a pro does that you can't
An appliance technician replaces the glass and the door hinges together when the door has dropped, and checks the thermostat that let the oven overheat the glass in the first place.
DIY cost: $40–150 for a glass panel