Checklist de apertura de piscina: prepárala para el verano

Why proper pool opening matters

Rushing the opening process is the #1 cause of early-season algae blooms, pump failures, and cloudy water. A structured approach saves $300–$800 in recovery costs. Professional pool opening costs $200–$400 and is worth it if you're unsure about equipment or chemical balance.

Equipment inspection checklist

• Pump and motor — check for cracks, leaking seals, unusual noise on startup; prime slowly to avoid air locks
• Filter — clean cartridge or backwash sand/DE filter before circulating; replace if pressure stays high after cleaning
• Heater — inspect for rodent nests, corrosion, and gas connections before firing
• Skimmer baskets and weir doors — replace cracked baskets ($10–$25); confirm weir swings freely
• Return jets and eyeball fittings — verify all return to proper angles for surface circulation
• Pool cover — clean, dry, and store folded (not crumpled) to extend life

Water chemistry startup sequence

• Step 1: Fill to mid-skimmer — top off water level before starting the pump
• Step 2: Run pump 24 hours — circulate fully before adding chemicals
• Step 3: Test and balance — pH first (7.2–7.6), then alkalinity (80–120 ppm), then calcium hardness (200–400 ppm)
• Step 4: Shock — add 2–3 lbs of calcium hypochlorite per 10,000 gallons at dusk; run pump overnight
• Step 5: Stabilizer — add cyanuric acid to 30–50 ppm for outdoor pools; protects chlorine from UV

When to call a pool tech

Call a professional if: the pump won't prime after 2–3 attempts, you see visible cracks in the pump housing or plumbing, the filter pressure gauge is stuck or reads abnormally high after cleaning, or the water is dark green (indicating heavy algae that needs professional recovery treatment at $300–$800).