How Much Does Electrical Wiring Cost?
Electrical wiring costs depend heavily on the scope of work — running a single new circuit costs $200–$500, while fully rewiring a 2,000 sq ft house runs $8,000–$20,000+ in the US. In Poland, full rewiring costs PLN 15,000–40,000, and in the Netherlands €6,000–€18,000. Licensed electricians charge $50–$130/hour in the US, and wiring work almost always requires permits and inspections.
Find a wiring
Compare verified providers and get free quotes.
Browse providersAverage wiring costs by project type
| Project type | Typical cost (USD) |
|---|---|
| Add a single outlet or switch | $150–$400 |
| Run a new 20-amp circuit | $200–$500 |
| Add a dedicated 240V circuit (EV charger, dryer) | $500–$1,500 |
| Wire a new room or addition | $1,000–$4,000 |
| Rewire a 1,500 sq ft house | $6,000–$15,000 |
| Rewire a 2,500 sq ft house | $10,000–$25,000 |
| Knob-and-tube removal + rewire | $12,000–$30,000+ |
Sources: HomeAdvisor 2025, Angi, BLS Occupational Employment Statistics.
What affects the cost?
- House age and existing wiring — older homes with knob-and-tube or aluminum wiring cost more to rewire due to removal and code compliance
- Accessibility — open walls during a renovation are far cheaper to wire than fishing cables through finished walls and ceilings
- Number of circuits and outlets — modern code requires more circuits than older homes had (dedicated circuits for kitchens, bathrooms, laundry)
- Wire type — copper Romex (NM-B) is standard; conduit wiring or aluminum requires different labor and materials
- Permits and inspections — most jurisdictions require electrical permits ($50–$500) with rough-in and final inspections
- Panel capacity — if your panel can't support new circuits, a panel upgrade adds $1,500–$4,000
Costs by country
Wiring costs in the United States
US electricians charge $50–$130 per hour for wiring work, with most residential wiring projects quoted as flat-rate jobs. Running a new circuit from the panel to a room costs $200–$500, including wire, breaker, and labor. Full house rewiring typically costs $4–$8 per square foot — a 2,000 sq ft home runs $8,000–$16,000. Homes with lathe-and-plaster walls or limited attic access cost 20–40% more due to the difficulty of pulling wire.
All wiring work requires a licensed electrician in every US state. Get 2–3 detailed quotes that specify wire gauge, circuit count, and whether drywall repair is included. Verify the electrician pulls permits — unpermitted work can void your homeowner's insurance and create problems at resale.
How to save on wiring costs
- Combine with renovations — rewiring during a kitchen or bathroom remodel (with walls open) cuts costs 30–50%
- Get multiple quotes — pricing varies 30–40% between electricians for the same scope
- Plan circuits carefully — consolidating runs reduces labor time
- Do cosmetic work yourself — patch drywall and paint after the electrician finishes to save on labor
- Ask about phased work — rewire the most critical areas first if budget is tight
Learn about the trade
How to become an electrician: training programs, licensing exams, salary data, and career paths in the US, Poland, and the Netherlands.
How to become a electrician