Bedrading cost in Polen: typically PLN 80–200 as of 2026. The exact price depends on job scope, materials, urgency (emergency and after-hours work costs more), and local demand. Compare verified local pros and request free, no-obligation quotes for real prices on your job.
Electrical wiring in Poland costs PLN 80–200 per point (punkt — one outlet or switch), or PLN 50–120/m² for full rewiring. A typical 60 m² apartment rewire runs PLN 8,000–18,000; a 120 m² house runs PLN 15,000–35,000. In Warsaw and Kraków, rates trend 20–30% higher. Most Polish electricians quote per-point rather than per-hour. Electrical work must comply with PN-HD 60364 standards. For work above 1 kV or involving main connections, an electrician needs SEP E1 certification. Get a written kosztorys (cost estimate) before work begins.
Average wiring costs by project type
| Type project | Typische kosten (PLN) |
|---|---|
| Add a single outlet or switch (1 point) | 80–200 zł |
| Run a new circuit | 300–700 zł |
| Add a dedicated 240V circuit (EV charger, dryer) | 600–1 500 zł |
| Wire a new room or addition | 1 500–4 000 zł |
| Rewire a 60 m² apartment | 8 000–18 000 zł |
| Rewire a 120 m² house | 15 000–35 000 zł |
| Full rewire, large house (200 m²+) | 30 000–55 000 zł |
Wiring costs in Poland
Electrical wiring in Poland costs PLN 80–200 per point (punkt — one outlet or switch), or PLN 50–120/m² for full rewiring. A typical 60 m² apartment rewire runs PLN 8,000–18,000; a 120 m² house runs PLN 15,000–35,000. In Warsaw and Kraków, rates trend 20–30% higher. Most Polish electricians quote per-point rather than per-hour.
Electrical work must comply with PN-HD 60364 standards. For work above 1 kV or involving main connections, an electrician needs SEP E1 certification. Get a written kosztorys (cost estimate) before work begins.
What affects the cost?
- House age and existing wiring — older homes with knob-and-tube or aluminum wiring cost more to rewire due to removal and code compliance
- Accessibility — open walls during a renovation are far cheaper to wire than fishing cables through finished walls and ceilings
- Number of circuits and outlets — modern code requires more circuits than older homes had (dedicated circuits for kitchens, bathrooms, laundry)
- Wire type — copper Romex (NM-B) is standard; conduit wiring or aluminum requires different labor and materials
How to save on wiring costs
- Combine with renovations — rewiring during a kitchen or bathroom remodel (with walls open) cuts costs 30–50%
- Get multiple quotes — pricing varies 30–40% between electricians for the same scope
- Plan circuits carefully — consolidating runs reduces labor time
- Do cosmetic work yourself — patch drywall and paint after the electrician finishes to save on labor
- Ask about phased work — rewire the most critical areas first if budget is tight
Frequently asked questions
Do I need to rewire an old house?
Yes if you have: knob-and-tube wiring (homes pre-1950), aluminum wiring (1965–1973), cloth-insulated wiring, or frequent breaker trips. These are fire hazards and many insurers will refuse coverage. Modern copper romex wiring is safe for 60+ years if not damaged. Have an electrician inspect any home over 40 years old.
How long does electrical wiring take?
New construction wiring (rough-in): 3–5 days for a 2,000 sq ft home. Final trim (outlets, switches, fixtures): 2–3 days. Whole-house rewire of an existing home: 2–6 weeks because walls must be opened, wiring run, walls patched, then painted. Per-room rewires take 1–2 days each.
Learn about the trade
Electrician licensing in PolenFirst-party pricing data
See our aggregated reference rates and provider availability across 5 countries.
HireLocal Reference Pricing Index — Q2 2026: Plumbing, Electrical & HVAC Service Rates Across 5 Countries