Bedrading cost in Nederland: typically €100–300 as of 2026. The exact price depends on job scope, materials, urgency (emergency and after-hours work costs more), and local demand. Compare verified local pros and request free, no-obligation quotes for real prices on your job.
Dutch electricians charge €45–€85 per hour for wiring work, with full house rewiring running €6,000–€18,000 including BTW (21%). Adding a single outlet or switch costs €100–€300. Typical apartment rewiring (80 m²) costs €5,000–€10,000. Rates in the Randstad are at the top of the range. Dutch wiring must meet NEN 1010 standards. After major wiring work, an inspection by a recognized body (keuringsinstantie) is recommended. Use an erkend installateur (recognized installer) from Techniek Nederland for reliable workmanship and warranty protection.
Average wiring costs by project type
| Type project | Typische kosten (EUR) |
|---|---|
| Eén stopcontact of schakelaar toevoegen | €100–€300 |
| Nieuwe groep aanleggen | €200–€500 |
| Aparte 240V-groep toevoegen (laadpaal, droger) | €400–€1,200 |
| Bedrading nieuwe kamer of aanbouw | €800–€3,000 |
| Herbedrading appartement 80 m² | €5,000–€10,000 |
| Herbedrading huis 140 m² | €8,000–€15,000 |
| Volledige herbedrading, groot huis (200 m²+) | €12,000–€18,000 |
Wiring costs in the Netherlands
Dutch electricians charge €45–€85 per hour for wiring work, with full house rewiring running €6,000–€18,000 including BTW (21%). Adding a single outlet or switch costs €100–€300. Typical apartment rewiring (80 m²) costs €5,000–€10,000. Rates in the Randstad are at the top of the range.
Dutch wiring must meet NEN 1010 standards. After major wiring work, an inspection by a recognized body (keuringsinstantie) is recommended. Use an erkend installateur (recognized installer) from Techniek Nederland for reliable workmanship and warranty protection.
What affects the cost?
- House age and existing wiring — older homes with knob-and-tube or aluminum wiring cost more to rewire due to removal and code compliance
- Accessibility — open walls during a renovation are far cheaper to wire than fishing cables through finished walls and ceilings
- Number of circuits and outlets — modern code requires more circuits than older homes had (dedicated circuits for kitchens, bathrooms, laundry)
- Wire type — copper Romex (NM-B) is standard; conduit wiring or aluminum requires different labor and materials
How to save on wiring costs
- Combine with renovations — rewiring during a kitchen or bathroom remodel (with walls open) cuts costs 30–50%
- Get multiple quotes — pricing varies 30–40% between electricians for the same scope
- Plan circuits carefully — consolidating runs reduces labor time
- Do cosmetic work yourself — patch drywall and paint after the electrician finishes to save on labor
- Ask about phased work — rewire the most critical areas first if budget is tight
Frequently asked questions
Do I need to rewire an old house?
Yes if you have: knob-and-tube wiring (homes pre-1950), aluminum wiring (1965–1973), cloth-insulated wiring, or frequent breaker trips. These are fire hazards and many insurers will refuse coverage. Modern copper romex wiring is safe for 60+ years if not damaged. Have an electrician inspect any home over 40 years old.
How long does electrical wiring take?
New construction wiring (rough-in): 3–5 days for a 2,000 sq ft home. Final trim (outlets, switches, fixtures): 2–3 days. Whole-house rewire of an existing home: 2–6 weeks because walls must be opened, wiring run, walls patched, then painted. Per-room rewires take 1–2 days each.
Learn about the trade
Electrician licensing in NederlandFirst-party pricing data
See our aggregated reference rates and provider availability across 5 countries.
HireLocal Reference Pricing Index — Q2 2026: Plumbing, Electrical & HVAC Service Rates Across 5 Countries