Heat pump icing up in summer — Alkmaar, Noord-Holland
Ice forming on the outdoor heat pump unit or indoor evaporator coil during summer cooling is a clear sign something is wrong — the system is overcooling the refrigerant below the freezing point of condensation on the coils. The most common cause is restricted airflow: a dirty air filter, blocked return vents, or a failed blower motor. Low refrigerant charge (from a leak) is the second most common cause — less refrigerant means lower coil temperature and ice buildup. Other causes include a stuck or failed defrost board (on reversing models), a dirty evaporator coil, or a malfunctioning thermostatic expansion valve (TXV). An HVAC technician checks refrigerant charge, inspects the filter and coil, measures superheat and subcooling, and fixes the root cause. Running a frozen system damages the compressor — turn it off and let it thaw before a technician arrives.
Waarom dit veel voorkomt in Alkmaar
Het vochtige zeeklimaat maakt verwarming en ventilatie cruciaal in Alkmaar; de energietransitie stuwt warmtepompen, isolatie en ventilatie hard, al beperken krappe kavels en monumenten soms de plaatsing van buitenunits.
Who to call
For this problem in Alkmaar, call a: Klimaattechnicus
Vind een Klimaattechnicus in AlkmaarSymptoms to look for
- Visible ice or frost coating on the outdoor unit's coil or refrigerant lines
- Indoor vents blowing warm air or barely any air at all
- Water dripping or pooling around the indoor air handler as ice melts
- System short-cycling — turning on and off every few minutes
- Unusual hissing or bubbling sound near the indoor coil (possible refrigerant leak)
Spoeddienst in Alkmaar
Spoeddiensten in Alkmaar reageren binnen 25–55 minuten in de stad, langer in de omliggende dorpen. Spoedtarieven rond €70–€160 voorrijden plus €65–€120/uur incl. btw.