Ceiling fan not spinning — Los Angeles, California
A ceiling fan that hums but doesn't spin, or one that has stopped responding entirely, usually has a burned-out capacitor, a faulty pull-chain switch, or a wiring issue at the canopy. The motor capacitor is the most common failure point — it's a $5–$15 part that stores energy to start and maintain blade rotation. If the fan light works but the blades don't turn, the capacitor or motor winding is almost certainly the culprit. A licensed electrician can diagnose the failure, replace the capacitor or switch in under an hour, and verify the circuit is safe. Full fan replacement runs $150–$400 including labor if the motor itself has failed.
Waarom dit veel voorkomt in Los Angeles
California's aggressive push toward electrification (EV chargers, heat pumps, solar panels) has created massive demand for panel upgrades and rewiring. Wildfire zones require fire-hardened electrical installations, and seismic retrofits often reveal outdated wiring.
Who to call
For this problem in Los Angeles, call a: Elektricien
Vind een Elektricien in Los AngelesSymptoms to look for
- Fan hums when turned on but blades do not rotate
- Fan does not respond to wall switch, pull chain, or remote
- Fan light works normally but blades remain stationary
- Blades spin slowly even on the highest speed setting
Spoeddienst in Los Angeles
Emergency services in Los Angeles typically respond within 30–60 minutes during business hours, but traffic can extend response times to 2+ hours across the metro area. After-hours emergency plumbing and electrical services run $125–$250/hour. California law requires contractors to be licensed for work over $500.