Paver installation costs $10–$30 per square foot installed in the US, depending on the paver material, project size, and site preparation needed. A standard 300 sq ft patio runs $3,000–$9,000, while a two-car driveway (600–800 sq ft) costs $6,000–$20,000+. Concrete pavers are the most popular choice, with natural stone and porcelain pavers at the premium end.
Vind een bestrating leggen
Vergelijk lokale vakmensen en ontvang gratis offertes.
Average paver installation costs by project
| Project type | Typical cost (USD) |
|---|---|
| Patio (300 sq ft) | $3,000–$9,000 |
| Walkway (100 sq ft) | $1,000–$3,000 |
| Driveway (600 sq ft) | $6,000–$18,000 |
| Pool deck (400 sq ft) | $4,000–$12,000 |
| Fire pit area (100 sq ft) | $1,000–$3,500 |
Costs by paver material[1,2,3]
| Material | Cost per sq ft installed |
|---|---|
| Concrete pavers | $10–$18 |
| Brick pavers | $12–$22 |
| Natural stone (flagstone, bluestone) | $18–$35 |
| Porcelain pavers | $15–$30 |
| Permeable pavers | $12–$25 |
| Travertine | $15–$30 |
What affects the cost?
- Paver material — concrete is cheapest; natural stone and porcelain are 2–3x more
- Site preparation — excavation, grading, and base material (gravel + sand) add $3–$5/sq ft
- Pattern complexity — herringbone and circular patterns take more labor than running bond
- Drainage requirements — slopes, drains, and permeable base systems add cost
- Existing surface removal — removing old concrete adds $2–$4/sq ft
- Edge restraints and borders — aluminum or concrete edging adds $3–$8/linear ft
Kosten per land
Paver installation costs in the United States
US homeowners pay $10–$30 per square foot installed for most paver projects. Concrete pavers dominate the market at $10–$18/sq ft. A proper installation includes 6–8 inches of compacted gravel base, 1 inch of leveling sand, pavers, and polymeric sand for joints. Budget an extra 10% for cuts and waste. In northern climates, deeper base preparation (12+ inches) is needed to prevent frost heave, adding $2–$4/sq ft.
The Interlocking Concrete Pavement Institute (ICPI) recommends hiring ICPI-certified installers for driveways and high-traffic areas. DIY is feasible for small patios — material cost alone runs $4–$10/sq ft.
How to save on paver installation
- Choose concrete pavers — they cost 40–60% less than natural stone with similar durability
- Use simple patterns — running bond or stack bond layouts use less labor than herringbone
- Get off-season quotes — fall and winter pricing can be 15–25% lower than spring/summer
- Buy pavers in bulk — full pallet pricing saves 10–20% vs. per-piece
- DIY small projects — walkways and small patios are manageable DIY projects
Meer over het vak
How to become a concrete mason: flatwork, stamped concrete, foundations, salary expectations, and career paths in the US, Poland, and the Netherlands.
Zo word je betonwerker