CV-ketel repareren Cost in Cyprus (2026)

Furnace repair costs depend on the type of furnace, the nature of the problem, and whether parts need replacement. In the US, most repairs cost $150–$500, while a full furnace replacement runs $2,500–$7,000+. In Poland, repairs range from PLN 500–5,000. In the Netherlands, boiler repairs cost €200–€2,000. In Spain, caldera repairs run €80–€400 most cases, full replacement €1,500–€3,500 (mixta gas) or €5,500–€10,000+ (aerotermia). Regular maintenance can prevent most common failures and extend your furnace's lifespan by years.

Average costs by job type

Job type	Typical cost (USD)
Diagnostic visit/service call	$75–$150
Thermostat replacement	$100–$350
Ignitor replacement	$150–$300
Blower motor replacement	$300–$600
Heat exchanger repair	$500–$1,500
Circuit board replacement	$200–$600
Gas valve replacement	$200–$500
Full furnace replacement (gas)	$2,500–$7,000
Full furnace replacement (high-efficiency)	$4,000–$10,000+

Sources: HomeAdvisor 2025 cost data, Angi service pricing reports.

What affects the cost?

• Type of repair — simple fixes (ignitor, thermostat) are cheap; major components (heat exchanger, blower) are expensive
• Furnace type — gas, oil, and electric furnaces have different parts and repair complexities
• Age of the unit — older furnaces may need hard-to-find parts or have multiple failing components
• Emergency timing — heating emergencies in winter carry premium rates of 1.5x–2x
• Warranty status — many parts are covered under manufacturer warranty for 5–10 years
• Efficiency upgrade — switching to a high-efficiency (95%+ AFUE) model costs more but saves on fuel
• Ductwork condition — if ducts are leaking or undersized, additional work may be needed

Costs in the United States

In the US, furnace repairs average $150–$500 for most common issues. A diagnostic visit typically costs $75–$150, which is often credited toward the repair. Replacing a furnace ignitor costs $150–$300, a blower motor runs $300–$600, and a heat exchanger — the most expensive repair — costs $500–$1,500. If the heat exchanger fails on a unit over 15 years old, replacement is usually more cost-effective.

A full gas furnace replacement costs $2,500–$7,000 for a standard efficiency model and $4,000–$10,000+ for a high-efficiency unit. High-efficiency gas furnaces and heat pumps may qualify for federal tax credits of up to $2,000. Annual furnace maintenance (typically $80–$150) includes inspection, cleaning, and filter replacement — this prevents most breakdowns and is well worth the investment.

Costs in Poland

Furnace and boiler repairs in Poland cost PLN 500–5,000. A service visit with diagnostics costs PLN 200–400. Common repairs include pump replacement (PLN 500–1,500), control board repair (PLN 400–1,200), and heat exchanger cleaning or replacement (PLN 800–3,000). A full gas boiler (kocioł gazowy) replacement costs PLN 5,000–15,000+ depending on the model and capacity.

In Poland, gas and coal boilers are common, though the government's Clean Air Programme (Czyste Powietrze) subsidizes replacement of old coal boilers with modern gas, heat pump, or pellet systems — subsidies range from PLN 10,000–37,000 depending on income. Always use a qualified technician with appropriate SEP certificates, especially for gas appliances.

Costs in the Netherlands

In the Netherlands, boiler (cv-ketel) repairs cost €200–€2,000. A service visit runs €80–€150. Common repairs include pump replacement (€200–€500), ignition system repair (€150–€400), and heat exchanger service (€300–€800). A full boiler replacement costs €1,500–€3,500 for a standard HR107 (high-efficiency) unit installed.

The Dutch heating market is transitioning away from natural gas. Many municipalities have plans to disconnect gas by 2050, making heat pumps an increasingly attractive alternative. Heat pump systems cost €5,000–€15,000 installed but qualify for ISDE subsidies of €1,500–€4,000. Regular annual maintenance (onderhoudsbeurt) costs €100–€175 and is recommended to maintain efficiency and warranty coverage. Use an installateur certified by Techniek Nederland.

Costs in Spain

Spanish caldera (boiler) repairs run €80–€400 for the most common service calls, with a desplazamiento + diagnóstico of €40–€80 typically credited toward the repair if you proceed. Common repairs: termopar / electrode €100–€180, vaso de expansión €120–€220, bomba (pump) €180–€350, intercambiador (heat exchanger) €350–€700. A full caldera mixta de gas replacement costs €1,500–€3,500 installed for high-efficiency models (Vaillant, Junkers/Bosch, Saunier Duval); a high-end condensation model with smart thermostat €3,000–€4,500. For aerotermia (heat-pump) conversion the all-in cost runs €5,500–€10,000+ but IDAE rebates under Real Decreto 477/2021 cover 35-50%.

The RITE (Real Decreto 178/2021) mandates annual maintenance for any caldera de gas — the revisión anual costs €60–€90 and the installer logs it in the manuals; skipping it voids both the manufacturer warranty and the home insurance's gas-leak coverage. Every 5 years a stricter inspección oficial (€80–€120) is required for natural-gas appliances, performed by an authorised IT (Instalador Térmico). On Spain's heating-season schedule, Comunidad Valenciana's mild winter means most apartments use combi boilers only for hot water 9 months a year, so demand peaks November-February rather than year-round as in colder regions.

How to save

• Schedule annual maintenance — a $100–$150 tune-up prevents most costly breakdowns
• Change filters regularly — dirty filters cause 80% of furnace failures; replace every 1–3 months
• Get a diagnostic before deciding — some "failures" are simple fixes like a tripped safety switch
• Compare repair vs replacement — if repair costs exceed 50% of a new unit, replacement is usually smarter
• Claim tax credits and subsidies — high-efficiency replacements qualify for significant incentives
• Get multiple quotes for replacement — prices vary 30–50% between HVAC companies
• Consider a service contract — annual maintenance plans often include priority service and repair discounts