Roof flashing pulling away — Chicago, Illinois
Roof flashing is the thin metal strip that seals joints where the roof meets walls, chimneys, dormers, or vents. When it pulls away, lifts, or develops gaps, rainwater bypasses the shingles and runs directly into the roof deck, causing rot, mold, and interior water damage. A roofer removes the old sealant, re-bends or replaces the flashing, re-integrates it with the shingle courses, and applies fresh roofing cement to restore a watertight seal.
Waarom dit veel voorkomt in Chicago
Chicago's freeze-thaw cycles, heavy snowfall, and ice dam formation are brutal on roofs. Flat roofs on bungalows and two-flats are especially vulnerable. Wind damage from severe storms off Lake Michigan accelerates shingle deterioration.
Who to call
For this problem in Chicago, call a: Dakdekker
Vind een Dakdekker in ChicagoSymptoms to look for
- Visible gap between the metal flashing and the wall or chimney
- Water stains on ceiling or walls near where the roof meets a vertical surface
- Rust streaks or corrosion visible on flashing edges from the ground
- Lifted or bent metal strips along the roofline after a storm
- Damp or musty smell in the attic near wall or chimney intersections
Spoeddienst in Chicago
Emergency home services in Chicago are widely available 24/7, with typical response times of 30–60 minutes. After-hours rates range from $100–$200/hour. During polar vortex events, heating emergencies can see delays of 4–8 hours due to overwhelming demand. Illinois requires plumbing and electrical licenses for all work.